EG-2001CA 156.2500M-PCHB

Crystal oscillator Product Number (please contact us) EG-2021CA: Q3807CA00xxxx00 EG-2001CA: Q3801CA00xxxx00 LOW-JITTER SAW OSCILLATOR (SPSO) OUTPUT : CMOS EG - 2021 / 2001CA Frequency range Supply voltage : : 62.5 MHz to 250 MHz 2.5 V  EG-2021CA 3.3 V  EG-2001CA Output : CMOS Function : Output enable (OE) External dimensions : 7.0 × 5.0 × 1.2 mm Actual size Very low jitter and low phase noise by SAW unit. EG-2021CA EG-2001CA Specifications (characteristics) Item Symbol Output frequency range f0 Supply voltage Storage temperature VCC T_stg Operating temperature T_use Frequency tolerance f_tol Current consumption Disable current Symmetry ICC I_dis SYM VOH VOL L_CMOS VIH VIL tr / tf t_str tDJ tRJ tRMS tp-p tacc Output voltage Output load condition (CMOS) Input voltage Rise time / Fall time Start-up time Jitter *1 Phase Jitter Specifications EG-2021CA 62.500 MHz to 170.001MHz to 170.000MHz 250.000MHz 2.5 V 0.125 V -40 C to +100 C P: 0 C to +70 C R: -5 C to +85 C G:  50  10-6 H:  100  10-6 25 mA Max. 30 mA Max. 600 A Max. 45 % to 55 % 40 % to 60 % VCC-0.35 V Min. 0.35 V Max. 15 pF Max. 70 % VCC Min. 30 % VCC Max. 2 ns Max. 10 ms Max. 0.2 ps Typ. 3 ps Typ. 3 ps Typ. 25 ps Typ. 4 ps Typ. tPJ Conditions / Remarks EG-2001CA 106.250 MHz to 170.000 MHz 3.3 V 0.3 V Please contact us about available frequencies. Storage as single product. 0 C to +70 C Z:  50  10-6 Y,H: 100  10-6 50 mA Max. 10 A Max. 45 % to 55 % VCC-0.4 V Min. 0.4 V Max. OE=VCC, No load condition OE=GND 50 % VCC level, L_CMOS Max. IOH = -8 mA IOL = 8 mA OE terminal Between 20% VCC and80% VCC level, L_CMOS Max. Time at minimum supply voltage to be 0 s Deterministic Jitter Random Jitter  (RMS of total distribution) Peak to Peak Accumulated Jitter() n=2 to 50000 cycles 1 ps Max. Offset frequency: 12 kHz to 20 MHz Frequency aging f_aging  10  10-6 / year Max.  5  10-6 / year Max. +25 C, First year, VCC=2.5 V,3.3 V *1 Tested using a DTS-2075 Digital timing system made by WAVECREST with jitter analysis software VISI6. EG-2021 CA 125.000000MHz C H P A (⑤⑥⑦: GPA, GRA are not available) ① ② ③ ④⑤⑥⑦ ⑤Frequency tolerance ①Model ②Package type ③Frequency G ±50 × 10-6 ④Output(C:CMOS) H ±100 × 10-6 ⑤Frequency tolerance ⑥Operating temperature ⑦Frequency aging (A*2: Frequency tolerance include aging、N*3: Frequency tolerance exclude aging) Product Name (Standard form) EG-2001 CA 125.000000MHz P C H ① ② ③ ④⑤⑥ ①Model ②Package type ③Frequency ④Symmetry (P: 50±5%) ⑤Supply voltage ⑥Frequency tolerance / Operating temperature ⑤Supply voltage C 3.3 V Typ. ⑥Operating temp. P 0 to +70°C R -5 to +85°C ⑥Frequency tolerance / Operating temperature H*2 ±100 × 10-6 / 0 to +70°C Y*3 ±100 × 10-6 / 0 to +70°C Z*4 ±50 × 10-6 / 0 to +70°C This includes initial frequency tolerance, temperature variation, supply voltage variation, load variation, reflow drift, and aging(+25 C,10 years). This includes initial frequency tolerance, temperature variation, supply voltage variation, load variation, and reflow drift.(except aging) This includes initial frequency tolerance, and temperature variation.(except reflow drift, supply voltage variation, load variation and aging) External dimensions (Unit:mm) EG-2021CA 1.1 1.4 1.8 #4 7.0±0.2 5.08 Pin map Pin. Connection OE *1 1 2 GND 3 OUT 4 VCC *1 Standby function built-in #2 is connected to the cover. #1 #2 7.0±0.2 5.08 1.5 3.9 2.6 2.6 E 125.000H 5.0±0.2 1.1 #3 1PC124A #2 #2 5.08 #4 #1 5.08 1.2±0.2 #1 #3 #3 E EG-2021 125.000C HPA172A 1.4 5.0±0.2 #4 Footprint (Recommended) (Unit:mm) EG-2001CA 1.2±0.2 *2 *3 *4 Product Name (Standard form) OE pin = HIGH : Specified frequency output. OE pin = LOW : Output is high impedance Pin map Pin Connection OE *1 1 2 GND 3 OUT 4 VCC *1 Standby function built-in #2 is connected to the cover. 5.08 To maintain stable operation, provide a 0.01uF to 0.1uF by-pass capacitor at a location as near as possible to the power source terminal of the crystal product (between Vcc - GND). PROMOTION OF ENVIRONMENTAL MANAGEMENT SYSTEM CONFORMING TO INTERNATIONAL STANDARDS At Seiko Epson, all environmental initiatives operate under the Plan-Do-Check-Action (PDCA) cycle designed to achieve continuous improvements. The environmental management system (EMS) operates under the ISO 14001 environmental management standard. All of our major manufacturing and non-manufacturing sites, in Japan and overseas, completed the acquisition of ISO 14001 certification. ISO 14000 is an international standard for environmental management that was established by the International Standards Organization in 1996 against the background of growing concern regarding global warming, destruction of the ozone layer, and global deforestation. WORKING FOR HIGH QUALITY In order provide high quality and reliable products and services than meet customer needs, Seiko Epson made early efforts towards obtaining ISO9000 series certification and has acquired ISO9001 for all business establishments in Japan and abroad. We have also acquired ISO/TS 16949 certification that is requested strongly by major automotive manufacturers as standard. ISO/TS16949 is the international standard that added the sector-specific supplemental requirements for automotive industry based on ISO9001. ►Explanation of the mark that are using it for the catalog ►Pb free. ►Complies with EU RoHS directive. *About the products without the Pb-free mark. Contains Pb in products exempted by EU RoHS directive. (Contains Pb in sealing glass, high melting temperature type solder or other.) ►Designed for automotive applications such as Car Multimedia, Body Electronics, Remote Keyless Entry etc. ►Designed for automotive applications related to driving safety (Engine Control Unit, Air Bag, ESC etc ). Notice       This material is subject to change without notice. Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of Seiko Epson. The information about applied circuitry, software, usage, etc. written in this material is intended for reference only. Seiko Epson does not assume any liability for the occurrence of infringing on any patent or copyright of a third party. This material does not authorize the licensing for any patent or intellectual copyrights. When exporting the products or technology described in this material, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You are requested not to use the products (and any technical information furnished, if any) for the development and/or manufacture of weapon of mass destruction or for other military purposes. You are also requested that you would not make the products available to any third party who may use the products for such prohibited purposes. These products are intended for general use in electronic equipment. When using them in specific applications that require extremely high reliability, such as the applications stated below, you must obtain permission from Seiko Epson in advance. / Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and related (automobiles, aircraft, trains, vessels, etc.) / Medical instruments to sustain life / Submarine transmitters / Power stations and related / Fire work equipment and security equipment / traffic control equipment / and others requiring equivalent reliability.  All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective. Seiko Epson Corporation